3M™ Repulpable Flying Splice Tape 906W, White, 25 mm x 50 m, 0.08 mm

An industry standard for flying splices 3M™ Repulpable Flying Splice Tape 906W has been an industry standard for flying splices because it provides high initial wet grab and excellent shear strength. Our 3 mil (0.075 mm) white tape features a lightweight tissue coated on both sides with a high tack, high shear strength, repulpable adhesive and is on a repulpable easy-release paper liner. Tape offers excellent heat resistance up to 204 °C. Recommended applications: • Flying splice at off-machine coater • Splicing tape on automatic splicing equipment Prevents broke contamination from non-repulpable splice material Repulpable construction means there is no need to remove splice from waste. The tape’s water dispersibility eliminates the danger of contaminating the paper mill broke with non-repulpable material. It meets or exceeds TAPPI UM-213, procedure A, so it helps to save labour costs and increase the value of waste paper. All components of the adhesive and backing meet the requirements of indirect food additive regulations as described under 21 CFR 176.170 and 21 CFR 176.180. This tape is not recommended for finished roll splices or where oozing and bleeding may occur. Keep the presses running and your customers coming back For decades 3M products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on 3M for solutions and service throughout your operation.