{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
PFERD TOOLS Ceramic oxide grain abrasive spiral band GSB cylindrical dia. 10x20 mm CO-COOL120 maximum stock removal on stainless steel
Article no.: 4007220868973
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification & Classification
| Article number | 4007220868973 | |
| EAN / GTIN | 4007220868973 | |
| Manufacturer number | 47501492 | |
| L-Number | L51700 101353 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 MARIENHEIDE, Germany, www.pferd.com |
Description
Description:
- For aggressive grinding with maximum stock removal on hard, tough and poorly thermally conductive materials.
- Constant maximum performance thanks to self-sharpening ceramic grain.
- Active grinding additives in the coating achieve a significantly higher stock removal rate, prevent clogging and result in cooler grinding.
- According to ISO 2421, abrasive sleeves are categorised as ”cylindrical abrasive sleeves”.
- GSB = large pack of abrasive sleeves
Feature:
- RPM, opt. from: 30000 RPM
- RPM, opt. to: 44000 RPM
- Abrasive: Ceramic grit CO-COOL
- Ø inside metric: 10 mm
- ø outer metric: 10 mm
- Grit size: 120
- Height: 20 mm
Advantage:
- The packaging size is ideal for industrial requirements.
- Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use.
- Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions.
- Maximum efficiency thanks to particularly high material removal and high abrasive aggressiveness.
Application:
- Recommendations for use: To change the abrasive sleeves easily, turn them slightly clockwise to fit and remove them. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. For best performance, use at a recommended cutting speed of 20-30 m/s. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools.
- Machining tasks: Deburring; Fine grinding in stages; Levelling; Roughening; Sharpening; Surface processing; Weld seam processing; Edge processing
- Drive types: Flexible shaft drive; Straight grinder
Material:
- Machinable materials:
- Aluminium
- Malleable cast iron
- bronze
- Cobalt-based alloys
- Grey/spheroidal cast iron (GG/GJL, GGG/GJS)
- Nickel-based alloys (e.g. Inconell and Hasteloy)
- Stainless steel (INOX)
- Titanium
Supplied with:
- Please order abrasive sleeve carriers separately.
Note:
- The maximum permissible peripheral speed is 30 m/s.
- For safety reasons, the specified maximum permissible speed must never be exceeded.
- Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve holder.