{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
PFERD TOOLS COMBICLICK pressed non-woven disc CC PNER dia. 125 mm medium-hard A coarse for finishing
Article no.: 4007220491812
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification & Classification
| Article number | 4007220491812 | |
| EAN / GTIN | 4007220491812 | |
| Manufacturer number | 47700203 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 MARIENHEIDE, Germany, www.pferd.com |
Description
Version:
- MH (medium hard)
Description:
- The COMBICLICK system consists of a specially developed backing pad and a stable holder on the back of the tool.
- With the backing pad, COMBICLICK tools can be used on standard angle grinders.
- The special geometry of the cooling slots ensures a high air flow rate, which significantly reduces the thermal load on the abrasive and the workpiece.
- The quick-clamping system, the robust holder, the secure locking of the tool and the integrated cooling system result in up to 30 % lower workpiece temperature, 25 % higher cutting performance, 30 % longer tool life and better utilisation of the abrasive compared to conventional tools.
- For achieving a very fine, homogeneous sanding pattern, which is sufficient for preparing the high-gloss polish, depending on the requirements.
- Particularly suitable for processing larger surfaces on stainless steel (INOX) components.
- PFERD TOOLS-ERGONOMICS recommends COMBICLICK as an innovative tool solution to sustainably reduce vibration, noise and dust generation during use and to improve working comfort. PFERD TOOLS-EFFICIENCY recommends COMBICLICK for long, fatigue-free and resource-saving work with perfect results in the shortest possible time.
- The quick-clamping system reduces tool change and set-up times.
- COMBICLICK from PFERD TOOLS has broad patent protection in Europe.
Feature:
- Max. RPM: 7650 RPM
- RPM, opt: 4500 RPM
- Design: MH (medium hard)
- Abrasive: Aluminium oxide A
- ø outer metric: 125 mm
- Grit size: coarse
Advantage:
- Innovative quick-clamping system guarantees convenient handling and cool grinding.
- Extremely quick and easy tool change reduces process costs.
- With COMBICLICK, scratches caused by protruding clamping parts are avoided and a very high utilisation of the available abrasive is achieved.
- High edge strength due to extreme resistance.
- Optimum contour adaptation as it can be freely profiled.
Application:
- Recommendations for use: Use COMBICLICK non-woven blanks with the COMBICLICK backing pad on variable-speed angle grinders. For best performance, use at a recommended cutting speed of 15-35 m/s. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear.
- Machining tasks: Cleaning; deburring; fine grinding in stages; roughening; structuring (matting, line matting and satin finishing); surface processing; weld seam processing
- Drive types: Angle grinder; cordless angle grinder
Material:
- Machinable materials:
- Aluminium
- brass
- bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosets (GRP, CFRP)
- Hardened, tempered steels over 1,200 N/mm² (< 38 HRC)
- Nickel-based alloys (e.g. Inconell and Hasteloy)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
Supplied with:
- Please order COMBICLICK backing pad separately.
Note:
- For safety reasons, the specified maximum permissible speed must never be exceeded.