{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
POLICAP set PCS 650-piece aluminium oxide for general use
Article no.: 4007220355435
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Abrasive cap |
Identification & Classification
| Article number | 4007220355435 | |
| EAN / GTIN | 4007220355435 | |
| Manufacturer number | 49606500 | |
| L-Number | L51100 515 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 MARIENHEIDE, Germany, www.pferd.com |
Description
Description:
Set of different POLICAP abrasive caps with matching holder. POLICAP tools have a seamless design and the entire tool surface can be used. Colour code for grit sizes: 60 and 80 = brown, 150 = black, 280 = red brown Cylindrical shape ZYA (previously shape A) and tapered conical shape with radius end WKG (previously shape G).
Feature:
- PFERD type: SET PCS 650
- Shape: ZYA, WKG
- Width, metric: 235 mm
- Length, metric: 332 mm
- Height: 50 mm
Advantage:
- Sturdy, reusable plastic packaging.
- The abrasive caps and abrasive spiral bands are firmly held in place on the holder as the holder expands during use.
- Good dimensional stability and excellent fine grinding thanks to special manufacturing process.
- Easy tool change.
Application:
- Recommendations for use: To easily change the abrasive caps and abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the arbor clamped in the tool drive and attach. For the best results, use at a recommended cutting speed of 10-20 m/s.
- Applications: Step-by-step fine grinding; Leveling; Surface work
- Drive types: Flexible shaft drive; Straight grinder
Material:
- Materials that can be worked:
- Cast steel
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Materials that can be worked: Cast steel; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC)
Note:
- The maximum permitted peripheral speed is 20 m/s.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.