{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
DUO-LOCK HAIMER MILL Power Series HPC, AlTiN, ⌀ f9 D1: 10mm
Article no.: 220320 10
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- Number of cutting edges Z: 4
Product details
Technical Data
| Coating | AlTiN | |
| Cutter ⌀ D | 10 mm | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| Number of cutting edges Z | 4 | |
| Spacing of the cutters | unequal spacing | |
| Helix angle | 37 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Machining strategy | HPC | |
| Through-coolant | no | |
| suitable arbor | with threaded shank | |
| Flute length L2 | 15 mm | |
| ⌀ D2 | 9.6 mm | |
| Overhang L1 | 15 mm | |
| Overall length L | 20 mm | |
| DUO-LOCK interface | DL10 | |
| Width across flats AF | 8 mm | |
| recommended tightening torque | 20 Nm | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.015 mm | |
| Type of product | Cutter insert for milling |
Identification & Classification
| Article number | 220320 10 | |
| EAN / GTIN | 4034221134196 | |
| Manufacturer number | DL10F1004MN1000CDA | |
| Manufacturer/responsible person | HAIMER GmbH, Weiherstraße 21, 86568 IGENHAUSEN, Germany, www.haimer.com |
Application Table
N
240
N
240
N
120
P
200
P
170
P
110
P
90
M
40
M
30
S
30
K
110
Description
Version:
DUO-LOCK HAIMER MILL: Can be used as a universal tool. Unique end face geometry for ramping and circular interpolation milling. First choice for applications with short overhangs. DUO-LOCK HAIMER MILL Power Series: First choice for applications with long overhangs and unstable clamping conditions. For particularly smooth running on long overhangs it is preferable to use solid carbide extensions.