{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
N.° de cat.:
Pie soporte con corriente, Altura 800 mm, Tipo: FR
Número de artículo: 927062 FR
Código del artículo:
- Ejecución construcción: Construcción de tubos de acero
- Selección del color: RAL 9002, 7035, 7016, 5012, 5005
Detalles de producto
Datos técnicos
| Ejecución construcción | Construcción de tubos de acero | |
| Grosor material | 1 mm | |
| Selección del color | RAL 9002, 7035, 7016, 5012, 5005 | |
| Altura | 800 mm | |
| Anchura | 50 mm | |
| Profundidad | 700 mm | |
| Tipo de toma de corriente | E | |
| Tensión nominal | 250 V | |
| Corriente nominal | 16 A | |
| Suministro de energía | Funcionamiento con alimentación de red | |
| Adecuado para profundidad de tablero | 750 mm | |
| Tipo de producto | Módulo de alimentación |
Identificación y clasificación
| Número de artículo | 927062 FR | |
| EAN / GTIN | 4062406755539 | |
| Número del fabricante | 927062 FR | |
| Fabricante/responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Descripción
Version:
Of steel hollow section, 50 mm wide with cross bracing and mounting for height adjustment at 25 mm intervals. Feet with plastic pads, do not damage the floor. With cable slots - for simple and professional routing of media cables / power cables.
Supplied with:
Support leg with two Schuko sockets with fastening materials, not wired.
Colour:
RAL 7035 light grey powder-coated.
Note:
Support legs without rear panel or cupboards require stabilising plates No. 927122 for stiffening. The height is to the underside of the worktop.
Pre-assembled workbenches must be secured against tipping.
Pre-assembled workbenches must be secured against tipping.
Warning:
Intended use
- Mount only on suitable holes.
- Support leg.
- Two enclosed sockets for installation by the customer in the support leg by a qualified electrician.
- Enclosed compressed air coupling for customer installation in the support leg (only item no.
- 927067, 927068) by a qualified mechanical engineer.
- Support leg for installation on the GridLine Vario workbench worktop with a depth of 750 mm.
- Assembly only in combination with stabilising plates, or alternatively with rear panel or drawer unit.
- Cable ducts in the leg for laying connecting cables.
- Stabilising plate.
- Stabilising plate for installation on the worktop and support leg of the GridLine Vario workbench.
- For stiffening and stabilising the workbench.
- Double stabilising plate: For connecting two worktops.
- For flush alignment of two worktops, additional installation of the joint strip is required.