{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Cat. N° de cat.:
Clé dynamométrique QuickSelect avec sécurité, sans embout, Couple maximal: 100Nm
Réf.: 657099 100
Référence:
Cliquer pour agrandir l’image
Cliquer pour agrandir l’image
Adjustment button
Cliquer pour agrandir l’image
Security screw
Cliquer pour agrandir l’image
Security sticker
Cliquer pour agrandir l’image
Cliquer pour agrandir l’image
Cliquer pour agrandir l’image
Cliquer pour agrandir l’image
Cliquer pour agrandir l’image
For a description of the legend, see description text.
- Anzugrichtung: Rechts- und Linksanzug
- Messgenauigkeit Drehmoment: ±3
- Werkzeug austauschbar: Einsteckwerkzeug
- Prüfprotokoll: Prüfprotokoll des Herstellers
Détails du produit
Caractéristiques techniques
| maximales Drehmoment | 100 Nm | |
| Anzugrichtung | Rechts- und Linksanzug | |
| Messgenauigkeit Drehmoment | ±3 % | |
| Werkzeug austauschbar | Einsteckwerkzeug | |
| Prüfprotokoll | Prüfprotokoll des Herstellers | |
| Serie | MANOSKOP® 730Fix | |
| Gesamtlänge L | 386 mm | |
| Drehmomentbereich | 20 Nm - 100 Nm | |
| Drehmomentbereich | 15 lbfft - 75 lbfft | |
| Skalenteilung 1 Teilstrich = | 0,5 Nm | |
| Gewicht | 988 g | |
| Justiertes Stichmaß am Drehmomentschlüssel [l2] | 17,5 mm | |
| Aufnahme für Einsteckwerkzeug | 9×12 mm | |
| Anzeige | analog | |
| Auslösesignalisierung | akustisch; haptisch | |
| Auslöseprinzip | mechanische Kurzwegauslösung | |
| Anschlussform | für Einsteckwerkzeuge (Rechteckaufnahme) | |
| Messtechnik | mechanisch | |
| Knickfunktion | nein | |
| Slipperfunktion | nein | |
| QuickRelease/ Schnellwechselfunktion | nein | |
| Schleppzeiger | nein | |
| Daten protokollierbar | nein | |
| Einstellung des Auslösewertes | mit Einstellskala | |
| Feedback | auslösend | |
| Ablesung umschaltbar | Nm; lbfft | |
| Messverfahren | Drehmoment | |
| Verstellbarkeit Auslösewert | verstellbar | |
| Norm | DIN EN ISO 6789 | |
| Hebellänge ohne Einsteckwerkzeug [l1] | 336 mm | |
| Hebellänge inklusive Werkskalibrierstichmaß [l3] | 353,5 mm | |
| Produktart | Drehmomentschlüssel |
Identification et classification
| Référence article | 657099 100 | |
| EAN / GTIN | 4018754269440 | |
| Réf. fabricant | 96503010 | |
| Fabricant/personne responsable | STAHLWILLE Eduard Wille GmbH & Co. KG, Lindenallee 27, 42349 WUPPERTAL, Germany, www.stahlwille.de |
Description
Version:
Sturdy compact one-armed torque wrench, adjustable to scale and self-triggering. The accuracy is sustained for many thousands of operations, because high quality material is used for all wearing parts and the flexible rod is under load only briefly on each occasion. Body and handle are of sturdy square section. Scales adjustable. Anti-clockwise tightening by reversing the plug-in tools.
Without any plug-in head (basic model); see No. 657582 − 657950 for suitable plug-in heads.
Units of measurement: Nm, lbfft.
Without any plug-in head (basic model); see No. 657582 − 657950 for suitable plug-in heads.
Units of measurement: Nm, lbfft.
Advantage:
Can be pre-set using the scale, and secured against further changes by removal of the setting knob. Optionally the wrench can be secured against tampering using the locking screw and the sticker supplied.
Function:
If the set value is reached while using the wrench, the wrench triggers giving a “signal” (acoustic and perceptible) and is then immediately ready for use again.
Application:
Since the set torque can be varied, it is ideal for repairs and short series production.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.