{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Cat. N° de cat.:
Outil de brunissage EG45-40M universel, Type de tige fixation: VDI50
Réf.: 291520 VDI50
Référence:
- Sens de la coupe: à gauche et à droite
Détails du produit
Caractéristiques techniques
| Type de tige fixation | VDI50 | |
| Sens de la coupe | à gauche et à droite | |
| Longueur de col LA | 129 mm | |
| Déport pointes f | 69 mm | |
| Force de laminage maximum | 4 kN | |
| ⌀ rouleau | 40 mm | |
| Type de produit | Outil de brunissage |
Identification et classification
| Référence article | 291520 VDI50 | |
| EAN / GTIN | 4060491000206 | |
| Réf. fabricant | EG45-1-40M-R02.50-VDI50 | |
| Fabricant/personne responsable | ECOROLL AG Werkzeugtechnik, Hans-Heinrich-Warnke-Straße 8, 29227 - CELLE, Deutschland, www.ecoroll.de |
Description
Version:
For use on CNC and conventional lathes.
With symmetrical structure – can be used universally as right-hand or left-hand version.
With symmetrical structure – can be used universally as right-hand or left-hand version.
Advantage:
Surface quality Rz < 1 µm possible.
Feed rates up to 1 mm/rev possible (external machining).
Consistent results due to continuous measurement of the rolling force.
Feed rates up to 1 mm/rev possible (external machining).
Consistent results due to continuous measurement of the rolling force.
Application:
For mechanical surface finishing.
For machining all metallic materials up to a tensile strength of 1400 N/mm2 and a hardness of up to 45 HRC.
For machining all metallic materials up to a tensile strength of 1400 N/mm2 and a hardness of up to 45 HRC.
Suitable for:
⌀ range (recommended): from 35 mm
Recommendation:
For external surfaces with subsequent radius up to plane surface.
Note:
- Other shank connections on request.
- Detailed technology recommendations can be found in the instruction manual.
Roller radius = 2.5 mm. Machinable workpiece radii from 4 mm to 12 mm.