{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Vario Basic workbench with rear panel, height 950 mm, Eluplan worktop, dark, Worktop length: 1000mm
Article no.: 922037 1000
Article code:
- Design version: Steel hollow section construction
- Workbench height: 950
- Workbench/desk load capacity - maximum distributed load (on wood): 600
- Insert thickness: 50
- Colour selection: RAL 9002, 7035, 7016, 5012, 5005
Product details
Technical Data
| Design version | Steel hollow section construction | |
| Material thickness | 1 mm | |
| Workbench height | 950 mm | |
| Workbench/desk load capacity - maximum distributed load (on wood) | 600 kg | |
| Insert thickness | 50 mm | |
| Colour selection | RAL 9002, 7035, 7016, 5012, 5005 | |
| Series | vario Basic | |
| Height | 950 mm | |
| Worktop length | 1,000 mm | |
| Worktop depth | 750 mm | |
| Worktop thickness | 50 mm | |
| Material of worktop | Eluplan | |
| Weight | 51 kg | |
| Type of product | Work table |
Identification & Classification
| Article number | 922037 1000 | |
| EAN / GTIN | 4062406083298 | |
| Manufacturer number | 922037 1000 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Workbench in sturdy steel construction. Support legs 50 mm wide with cross bracing. Feet with plastic pads, do not damage the floor. Additional rear panel to increase the load capacity. With 1 × pair of stabilising plates for stiffening.
Supplied with:
2 × support legs, 1 × pair of stabilising plates, 1 × two-piece rear panel, worktop.
Optional extras:
Additional accessories such as manual height adjustment, wheels, side panels, etc. can be found under GridLine individual components in Group 92.
Colour:
Body and supports light grey RAL 7035, powder-coated.
Note:
Supplied for self-assembly, saving freight costs. Delivered unassembled.
Warning:
Intended use
Reasonably foreseeable misuse
- Use the workbench only when in good technical condition. If any faults occur which may affect safety, rectify them without delay.
- Only mount components in the holes provided for this purpose.
- Use exclusively approved Hoffmann Group accessories for modification or rebuilding.
- For work in indoor industrial environments. For use on dry solid floors.
- Operate only in a dry environment.
Reasonably foreseeable misuse
- Do not place or position on the workbench. Do not carry people.
- Not for use in areas where the floor slopes upwards or downwards.
- Do not use in explosion hazard areas.
- No do expose it to water, precipitation or contamination.
- Not for use in areas where the floor is loose or unpaved.
- Do not overload the workbench, worktop, drawers or storage shelves.
- Do not make any unauthorised modifications.