{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Manual hydraulic device with pivoting cylinder in a sheet metal case, Type: 1
Article no.: 834655 1
Article code:
Offers
Product details
Technical Data
| Case length | 495 mm | |
| Case width | 385 mm | |
| Case height | 140 mm | |
| Type of product | Punching tool |
Identification & Classification
| Article number | 834655 1 | |
| EAN / GTIN | 4045197967244 | |
| Manufacturer number | 834655 1 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Manual hydraulic device with pressure rating up to approx. 600 bar, with multiple movement cylinder (can be rotated and swivelled through 360°), with 3/4−16 UNF thread suitable for draw bolts No. 834070. Aluminium pivot head and cylinder combination, very light in weight.
Punching power: For round sheet metal punches and swarf punches up to ⌀ 82 / thickness 3 mm / St 37 or larger for thinner and weaker materials. Case L×W×H: 495×385×140 mm.
Punching power: For round sheet metal punches and swarf punches up to ⌀ 82 / thickness 3 mm / St 37 or larger for thinner and weaker materials. Case L×W×H: 495×385×140 mm.
Application:
For powering sheet metal punches.
Note:
When ordering the hydraulic device, please order the draw bolts No. 834070 necessary for the round sheet metal punches!
Warning:
Intended use
Reasonably foreseeable misuse
- The manual hydraulic drive is intended for punching burr-free round, square and rectangular holes in sheet metal.
- The drive is suitable for manufacturing control cabinets and system building.
- Use only when it is technically in good condition and safe to operate.
- For both industrial and private use.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not subject it to blows, impacts or heavy loads.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
- Do not exceed the maximum force at the handle and do not exceed the pressure rating of the tool.
- Do not attach any extensions or bypass adaptors to the handle.