{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Four-pin crimping tool SelectorCrimp, 2-component grips, Type: 3,3
Article no.: 729525 3,3
Article code:
Product details
Technical Data
| Series | SelectorCrimp | |
| for conductor cross-section | 0.14 mm2 - 3.3 mm2 | |
| overall length | 230 mm | |
| Positive barrier available | yes | |
| digital display | no | |
| Type of product | Crimping tool |
Identification & Classification
| Article number | 729525 3,3 | |
| EAN / GTIN | 4049002111174 | |
| Manufacturer number | 8752 0000 6 | |
| Manufacturer/responsible person | Rennsteig Werkzeuge GmbH, An der Koppel 1, 98587 STEINBACH-HALLENBERG, Germany, www.rennsteig.com |
Description
Version:
Reliable crimping due to positive barrier and synchronised advance of the crimping pins.
Crimp mandrel advance can be selected according to MIL within a range of 8 positions. Individual contact making and multi-pin contact making available. MIL positioning can be performed without problems. Optimised opening aperture, ergonomic design and reduced manual force requirement. Selector position can be read from both sides of the crimp tool.
Crimp mandrel advance can be selected according to MIL within a range of 8 positions. Individual contact making and multi-pin contact making available. MIL positioning can be performed without problems. Optimised opening aperture, ergonomic design and reduced manual force requirement. Selector position can be read from both sides of the crimp tool.
Application:
For turned pin and socket contacts with crimp geometry similar to MIL.
Supplied with:
Four-pin crimp tool in system packaging.
Note:
The selection of the crimp tool and contact mounting depend on the respective application. There are various contact mountings, depending on the insertion system. These are available on request.