{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Abrasive sleeve, conical (CER) 40 grit coarse, largest sleeve ⌀× sleeve width: 20X63mm
Article no.: 553875 20X63
Article code:
- Grinding medium code: Ceramic
Product details
Technical Data
| Grinding media | Ceramic grit | |
| Grinding medium code | Ceramic | |
| Grit | 40 | |
| Grit designation | coarse | |
| Sleeve shape | conical | |
| largest sleeve ⌀ | 20 mm | |
| Sleeve width | 63 mm | |
| Type of product | Abrasive sleeve |
Identification & Classification
| Article number | 553875 20X63 | |
| EAN / GTIN | 4045197723321 | |
| Manufacturer number | 553875 20X63 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
Made of non-tearing, synthetic resin bonded material with long service life and good grit adhesion.
Ceramic grit (CER).
The rubber body of the abrasive sleeve holder expands at high speed to hold the abrasive sleeve in place. The full width of the sleeve can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with abrasive sleeve holders.
Ceramic grit (CER).
The rubber body of the abrasive sleeve holder expands at high speed to hold the abrasive sleeve in place. The full width of the sleeve can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with abrasive sleeve holders.
Application:
Abrasive sleeves are predominantly used for surface grinding tasks which require the removal of large amounts of material − even at sharp edges.
Suitable for:
Abrasive sleeve holder No. 553830.