{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Square file with 2-component handle, Cut 2 (2nd cut), Length without tang: 300mm
Article no.: 512201 300
Article code:
- Shape: D
- Shape description: square, taper plain end
- Standard: DIN 7261
Product details
Technical Data
| Cut | 2 | |
| Type of cut | 2nd cut | |
| Shape | D | |
| Shape description | square, taper plain end | |
| File surfaces | 4 | |
| Width | 12 mm | |
| Length without tang | 300 mm | |
| incl. file handle | yes | |
| Standard | DIN 7261 | |
| Type of product | Engineer's file |
Identification & Classification
| Article number | 512201 300 | |
| EAN / GTIN | 4009215190670 | |
| Manufacturer/responsible person | Friedr. Dick GmbH & Co. KG, Esslinger Straße 4-10, 73779 DEIZISAU, Germany, www.dick.de |
Application Table
Description
Version:
The blanks are forged and ground; manufactured with an exact cut of even density and depth using special machines. These non-convex files have tooth profiles appropriate to each grade of file.
Cuts on all faces; convex end.
File ready driven into ergonomic 2-component file handle with hole for hanging up and handy colour-coded clips (red, green, yellow) for individually identifying e.g. the cutting pattern.
Cuts on all faces; convex end.
File ready driven into ergonomic 2-component file handle with hole for hanging up and handy colour-coded clips (red, green, yellow) for individually identifying e.g. the cutting pattern.
Application:
The quality file for workshop use with long tool life and high removal rate.
Standard:
DIN 7261 form D
Note:
File without handle available under No. 512200.