{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Contact point calibration aid, Calibration diameter: 25mm
Article no.: 358975 25
Article code:
Product details
Technical Data
| Height | 178 mm | |
| Type of product | Probes |
Identification & Classification
| Article number | 358975 25 | |
| EAN / GTIN | 4062406113551 | |
| Manufacturer number | 358975 25 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Very easy calibration of the 3D contact point.
- Completer calibration process in X, Y and Z in just a few minutes.
- Protection against collisions and spindle damage by the spring pin.
- Very easily fixed to the to the worktable by means of a magnetic stand.
- Highly accurate and consistent calibration results.
- The carbon casing ensures shock-proof characteristics, high-quality design and temperature resistance.
Description:
- Move the spindle nose or calibrated tool to the sprung pin and lock it with the side clamping screw.
- Use a contact point to probe the position of the pin.
- Unscrew the pin and perform diameter calibration within the integral setting ring ⌀ 25 mm.
Advantage:
- The spring pin avoids spindle damage when the unit is blocked out.
- Easy handling and enormous saving of time.
- This functions for all manufacturers.
- Calibration in a single operation and without additional equipment such as setting rings and gauge blocks.
Application:
For calibrating the 3D contact point.
Supplied with:
Supplied in a case with foam, calibration aid with magnetic stand, nut spinner for removing the spring pin, T-wrench for stopping or unlocking the spring.
Warning:
Intended use
Reasonably foreseeable misuse
- For calibration of the 3D edge finder in the machine.
- For calibration of the X, Y and Z axes.
- Magnetic stand for attachment to the machine table.
- Use only when it is technically in good condition and safe to operate.
- For work in industrial environments.
Reasonably foreseeable misuse
- Do not use arbors or tools to press in the spring pins.
- Do not make any unauthorised changes or modifications to it.