{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Tapping chuck type DSPL with shank, Type: 12
Article no.: 334510 12
Article code:
Product details
Technical Data
| Thread range | M3 − M12 | |
| for Whitworth threads | G1/8 − G1/2 | |
| for Whitworth pipe threads | R1/8 | |
| Clamping range square | 0 mm - 8 mm | |
| Shank ⌀ range | 2.5 mm - 10 mm | |
| pivoting parallel to axis | 1 mm | |
| Length compensation in compression | 10 mm | |
| Length compensation in tension | 20 mm | |
| Length from the machine spindle | 135 mm | |
| Body ⌀ | 58 mm | |
| Morse taper MT | 2 | |
| Type of product | Tapping head |
Identification & Classification
| Article number | 334510 12 | |
| EAN / GTIN | 2050001921062 | |
| Manufacturer number | 6707468 | |
| Manufacturer/responsible person | Bilz Werkzeugfabrik GmbH & Co. KG, Vogelsangstraße 8, 73760 OSTFILDERN, Germany, www.bilz.de |
Description
Version:
- Double clamping is achieved by 3 jaws which centre the tap shank and by 4 additional jaws which clamp the tap square drive.
- When set correctly, the safety clutch prevents tap breakage.
- Blind hole threads can be tapped down to the bottom.
- The self-adjustment mechanism compensates for misalignment errors between the machine spindle and the component.
- The flexible length compensation is effective on compression and tension. It prevents the thread being cut incorrectly with manual or power feed.
Application:
For tapping internal threads on reversible drilling machines, turret lathes. Applicable horizontally and vertically for right-handed threads.
Supplied with:
1 chuck key.