{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Revolving lathe centre high precision version Point angle 60°, Morse taper: 3
Article no.: 320700 3
Article code:
Product details
Technical Data
| Morse taper | MT3 | |
| Body ⌀ D | 32.5 mm | |
| Reach B | 28 mm | |
| largest centre point ⌀ 60° A | 28 mm | |
| maximum radial run-out | 0.003 mm | |
| for workpiece weight | 400 kg | |
| Type of product | Centring drill |
Identification & Classification
| Article number | 320700 3 | |
| EAN / GTIN | 4045197313249 | |
| Manufacturer number | 3WP |
Description
Version:
- Extremely slim body and high concentricity.
- Precision needle and thrust bearings result in a maximum variation of 0.003 mm and a very small body ⌀.
- Taper and chamfered parts are made of hardened bearing steel (61 − 63 Rockwell).
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For turning and grinding where a small head ⌀ and high accuracy are required.