{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Guide bush for bore H7, Bush ⌀: 36D1mm
Article no.: 290415 36D1
Article code:
Offers
Product details
Technical Data
| Bush ⌀ | 36 mm | |
| Slot width | 14.39 mm | |
| Length | 100 mm | |
| Type of product | Broach |
Identification & Classification
| Article number | 290415 36D1 | |
| EAN / GTIN | 2050001674203 | |
| Manufacturer number | 44452 |
Description
Version:
Without collar.
Application:
Push broaches with identification mark A and guide bushes with identification mark A can be used together.
The same applies to the other markings. So that the broach can run through to its full height and can drop back again freely, the guide bush must be inserted into the press bedplate at the same time as the workpiece is threaded through.
The same applies to the other markings. So that the broach can run through to its full height and can drop back again freely, the guide bush must be inserted into the press bedplate at the same time as the workpiece is threaded through.
Note:
Further sizes available on request.