{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
GARANT Master Alu PickPocket solid carbide roughing end mill HPC, uncoated, ⌀ e8 DC: 14mm
Article no.: 202002 14
Article code:
- Tolerance nominal ⌀: e8
- No. of teeth Z: 3
- Helix angle: 42
- Direction of infeed: horizontal, oblique and vertical
- Shank: DIN 6535 HA to h6
Product details
Technical Data
| Cutting edge ⌀ DC | 14 mm | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 3 | |
| Helix angle | 42 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 6535 HA to h6 | |
| Balance quality with shank | G 2.5 with HA | |
| Flute length Lc | 26 mm | |
| Overhang length L1 incl. recess | 36 mm | |
| Recess ⌀ D1 | 13.8 mm | |
| Overall length L | 83 mm | |
| Shank ⌀ Ds | 14 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in short-chipping aluminium | 0.12 mm | |
| Feed fz for side milling in short-chipping aluminium | 0.17 mm |
Identification & Classification
| Article number | 202002 14 | |
| EAN / GTIN | 4062406125820 | |
| Manufacturer number | 202002 14 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
250
N
200
N
180
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
For roughing and finishing.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Very high feed rates when plunging vertically.
Ramping capability up to 45°.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Very high feed rates when plunging vertically.
Ramping capability up to 45°.
Advantage:
Optimised flute form, eccentric relief ground, generous chip spaces.