{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Roughing end mill HSS-Co8, uncoated, ⌀ js12 DC: 6mm
Article no.: 192400 6
Article code:
- Tool material: HSS Co 8
- Standard: DIN 844 B
- Milling profile: NR
- Tolerance nominal ⌀: js12
- No. of teeth Z: 3
Product details
Technical Data
| Cutting edge ⌀ DC | 6 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Standard | DIN 844 B | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | js12 | |
| No. of teeth Z | 3 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 13 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.01 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification & Classification
| Article number | 192400 6 | |
| EAN / GTIN | 4045197105875 | |
| Manufacturer number | 192400 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
83
P
28
P
23
P
23
K
23
N
55
Description
Version:
Relief ground knuckle form profile.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
Centre cutting teeth for plunging.
Universal end mills for profile milling or for plunging.
Advantage:
Compared to multi−flute cutters, better chip evacuation due to larger flutes.