{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Pair of gloves Arc Flash, Glove size: 8
Article no.: 094905 8
Article code:
- Standard: EN 407
- Cut protection class: C
Product details
Technical Data
| Glove characteristics | Flame resistance stage 4 | |
| Application | reusable | |
| Scope of application | All-round | |
| Knitted technology | 13G | |
| Standard | EN 407 | |
| EN 388 | 2341C | |
| EN 407 | 41324X | |
| Radiated heat up to | 41324X | |
| Backing material | Aramid fabric | |
| Coating | Neoprene/nitrile | |
| Coating variant | The palms of the hands | |
| Cut protection class | C | |
| ATPV | 42.3 cal/cm2; 16.8 cal/cm2 | |
| Colour | yellow / black | |
| Type of product | Electrician's gloves |
Identification & Classification
| Article number | 094905 8 | |
| EAN / GTIN | 4062406281762 | |
| Manufacturer number | 094905 8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Arc Flash. Arc flash glove with cut protection (level C). ATPV values for the palm: 42.3 cal/cm2 ; ATPV values for the back of the hand: 16.8 cal/cm2 .
Application:
For working on electrical installations.
Standard:
EN 388; EN 407
Level 2 acc. to ASTM F2675.
Level 2 acc. to ASTM F2675.
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasions, blisters, cutting hazards, arc faults and contact heat up to 100°C.
- For work with electrical components, warm and dry to slightly damp workpieces.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
Reasonably foreseeable misuse
- No protection against chemical, thermal or electrical hazards.
- Do not wear when close to rotating machine parts.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.