{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Modular ultrasonic cleaning unit MOD, Capacity: 60l
Article no.: 082922 60
Article code:
Find similar products here:
Product details
Technical Data
| Item length | 725 mm | |
| Item width | 562 mm | |
| Item height | 850 mm | |
| Length of component basket | 460 mm | |
| Width of component basket | 275 mm | |
| Cleaning bath length | 510 mm | |
| Cleaning bath width | 350 mm | |
| Cleaning bath height | 240 mm | |
| Capacity of cleaning bath | 60 l | |
| Nominal contents | 50 l | |
| Drain connection size | 1 in | |
| Heating power | 1,700 W | |
| Maximum ultrasonic power | 3,200 W | |
| Power supply | Mains-powered | |
| Nominal voltage | 230 V | |
| Power consumption | 2,510 W | |
| Extension option oil separator | yes | |
| Extension option pump filtration | yes | |
| Extension option rinsing module | yes | |
| Extension option drying module | yes | |
| Weight | 60 kg | |
| Type of product | Ultrasonic cleaning unit |
Identification & Classification
| Article number | 082922 60 | |
| Manufacturer number | SW60MOD-B / 101402/ 101300 |
Description
Version:
Units of drawn or welded stainless steel. Temperature control from 30 °C to 80 °C in 5 °C steps.
Modular devices with multi-frequency technology. Units of duplex stainless steel, can be fitted with oil separator, pump filtration and additional side insulation. Can be extended with a flushing device and/or hot-air dryer.
Modular devices with multi-frequency technology. Units of duplex stainless steel, can be fitted with oil separator, pump filtration and additional side insulation. Can be extended with a flushing device and/or hot-air dryer.
- Ultrasonic vibration systems: Multiple ultrasonic vibratory systems create tiny microscopic vacuum bubbles in the cleaning fluid. These bubbles then implode due to variations in pressure, by which means they remove the dirt particles from the surface of the component being cleaned.
- Boost function: Second cleaning stage “Powerclean” for intensive cleaning of heavy soiling and oxidation.
- Sweep function: For a homogeneous sonic field distribution.
- Degassing and auto-degassing function: Degassing cleaning fluid when it is used for the first time.
Application:
For removal of oil, grease, grinding fluids, polishing fluids, paint residues, flux, oxide layers, carbon deposits, scale from nearly all surfaces and even from inaccessible places, whilst treating the component being cleaned with the utmost care. Use special power cleaners depending on the dirt and effectiveness required (from No. 082930). The component to be cleaned must be completely surrounded by cleaning fluid.
Supplied with:
Ultrasonic cleaning unit with cover, without basket (No. 082926).
Note:
Further sizes and types on request.
Mono ultrasonic cleaning unit with welded duplex stainless steel bath for particularly difficult applications such as contamination with grinding and polishing agents, available on request.
Component basket can be found under No. 082926 in the online shop.
Mono ultrasonic cleaning unit with welded duplex stainless steel bath for particularly difficult applications such as contamination with grinding and polishing agents, available on request.
Component basket can be found under No. 082926 in the online shop.