{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Deflecting torque wrench with scale, maximum torque − Type: 800-3/4N·m
Article no.: 657755 800-3/4
Article code:
Click to enlarge image
Click to enlarge image
Can be separated for ease of transport.
Click to enlarge image
- Direction of tightening: For right- and left-hand tightening
- Torque measuring accuracy: ±4
- Test certificate: Manufacturer’s test certificate
- Square drive: 3/4
Find similar products here:
Product details
Technical Data
| maximum torque | 800 Nm | |
| Direction of tightening | For right- and left-hand tightening | |
| Torque measuring accuracy | ±4 % | |
| Test certificate | Manufacturer’s test certificate | |
| Overall length L | 1,214 mm | |
| Torque range | 200 Nm - 800 Nm | |
| Torque range | 150 lbfft - 600 lbfft | |
| Scale graduation, 1 graduation = | 10 Nm | |
| Weight | 7,300 g | |
| Square drive | 3/4 in | |
| Display | analogue | |
| Release signalling | haptic | |
| Trigger principle | mechanical long-travel release | |
| Connection format | Push-through square drive (ratchet) | |
| Measurement technology | mechanical | |
| Deflection function | yes | |
| Memory pointer | no | |
| Data can be recorded | no | |
| Setting the trigger value | with adjustment scale | |
| Feedback | triggering | |
| Reversible reading | Nm; lbfft | |
| Measurement process | Torque | |
| Adjustable trigger value | adjustable | |
| Standard | DIN EN ISO 6789 | |
| Type of product | Torque Wrench |
Identification & Classification
| Article number | 657755 800-3/4 |
Description
Version:
Sturdy one-arm torque wrench, can be pre-set by a scale, self-triggering. The trigger mechanism makes unintentional overtightening extremely unlikely. Reversal of the square drive for right-hand and left-hand working. Integral ratchet mechanism.
Units of measure: Nm, lbfft.
Units of measure: Nm, lbfft.
Function:
On reaching the preset torque value the wrench triggers a clearly detectable deflection and is then immediately ready for use again. The long-travel indication gives the user an unmistakable signal that the set torque has been reached.
Application:
For controlled tightening of screws to pre-set torque. Ideal for maintenance, installation, and repair work, but also for small-series production work.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.