{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Soft top jaw set 3 pieces, for chuck type: 250
Article no.: 313300 250
Article code:
Product details
Technical Data
| for chuck type | 250 mm | |
| Length L | 125 mm | |
| Width B | 30 mm | |
| Height H | 50 mm | |
| Slot width D | 12 mm | |
| Bore spacing b | 40 mm | |
| Tenon length A | 20 mm | |
| suitable for colour code | Röhm self-centring chucks and jaws; Schunk self-centring chucks and jaws | |
| Type of product | Self-centring chuck jaws |
Identification & Classification
| Article number | 313300 250 | |
| EAN / GTIN | 4019208023700 | |
| Manufacturer number | 094010 | |
| Manufacturer/responsible person | Röhm GmbH, Heinrich-Röhm-Straße 50, 89567 SONTHEIM/BRZ, Germany, www.roehm.biz |
Description
Version:
Ground location faces, burnished.
Unstepped, for boring out to individual clamping ⌀. Precision milled contact face, not burnished.
Unstepped, for boring out to individual clamping ⌀. Precision milled contact face, not burnished.
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
For fitting to hardened base jaws. For clamping irregularly shaped or already machined components which have to be protected against damage. The jaws are machined according to the contours of the component.
For fitting to hardened base jaws. For clamping irregularly shaped or already machined components which have to be protected against damage. The jaws are machined according to the contours of the component.
Material:
Quality product made of 16MnCr5.
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.
Note:
Aluminium top jaws on request.