{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Stepped jaws set, 3 pieces, straight serration, for chuck type: 160
Article no.: 313237 160
Article code:
Product details
Technical Data
| for chuck type | 160 mm | |
| Length L | 66.6 mm | |
| Width B | 20 mm | |
| Height H | 46 mm | |
| Version | 3-step | |
| Type of product | Self-centring chuck jaws |
Identification & Classification
| Article number | 313237 160 | |
| EAN / GTIN | 2050001929426 | |
| Manufacturer number | 0162099 | |
| Manufacturer/responsible person | SCHUNK SE & Co. KG, Bahnhofstraße 106-134, 74348 LAUFFEN/NECKAR, Germany, www.schunk.com |
Description
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
For turning or drilling.
For turning or drilling.
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.
Note:
- Hard top and stepped jaws purchased subsequently must be ground internally in the chuck for concentricity and run-out.
- Please check the serrations when matching to lathe chucks.