Version:
GridLine mobility unit consisting of 2 galvanised sheet metal cross beams. Completely assembled with set of wheels and 1 set of 2-component Haptoprene® push handle. For bolting on to GridLine cabinets and tool cabinets. Push the cabinet from the side.
For retrofitting to GridLine cabinets and tool cabinets.
Suitable for:
Supplied with:
1 × cross beam with 2 castors with parking brakes, 1 × cross beam with 2 fixed wheels, 1 × push handle set.
Attention:
Because of the risk of tipping over, when installing the mobility unit comply strictly with the specified maximum cabinet height.
When calculating the load capacity, please take account of the tare weight of the cabinet / tool cabinet.
Note:
Mobility unit suitable for GridLine tool cabinets up to a maximum height of 950 mm. Maximum overall load capacity of tool cabinets 600 kg. Mandatory requirement that any drawers are fitted with one-hand individual drawer release.
Mobility unit suitable for GridLine large-capacity cabinets up to a maximum height of 1000 mm. Maximum overall load capacity of large-capacity cabinets 200 kg. Only for GridLine large-capacity cabinets without drawers.
Warning:
Intended use- Wheels and push handle for mounting on GridLine cabinet or tool cabinet with maximum width of 1250 mm (50 G) as per combination table.
- Push handle without mounting block for mounting on GridLine cabinet and tool cabinet.
- Push handle with mounting block for mounting on workbench worktop (mobile).
- If mounting on tool cabinet, replace drawers with GridLine drawers with one-hand individual drawer release system.
Reasonably foreseeable misuse- Do not stand or sit on the cabinet. Do not carry people.
- Not for use in areas where the floor slopes upwards or downwards.
- Not for use in areas where the floor is loose or unpaved.
- Not for mounting on cabinet with width 1500 mm or 2000 mm (60 G and 80 G).