{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Combination four-jaw lathe chucks recessed mount, DIN 702-4, Outer ⌀ A / taper: 125mm
Article no.: 315635 125
Article code:
Product details
Technical Data
| Standard | DIN 702-4 | |
| External ⌀ A | 125 mm | |
| Aperture E | 38 mm | |
| Height without jaws H1 | 75 mm | |
| Height with jaws H2 | 95 mm | |
| Pitch circle diameter F | 108 mm | |
| Centring ⌀ B | 95 mm | |
| Centring depth C | 4 mm | |
| Chuck key square K | 9 mm | |
| Weight | 6 kg | |
| Type of product | Combination four-jaw chuck |
Identification & Classification
| Article number | 315635 125 | |
| EAN / GTIN | 5907412202808 | |
| Manufacturer number | 354605005700 | |
| Manufacturer/responsible person | Bison Spanntechnik GmbH, Reisholzer Werftstraße Halle 3 42, 40589 DÜSSELDORF, Germany, www.bison-chuck.com |
Description
Version - image:
Individual adjustment of combined jaws.
Centring adjustment of jaws.
Centring adjustment of jaws.
Application:
Combined clamping option due to two different jaw adjustments:
a) Self-centring adjustment of the base jaws (geared scroll);
b) Individual adjustment of top jaws.
This allows irregularly shaped components to be clamped as if to a face plate. The gear scroll for jaw adjustment is through-hardened, the flanks of the scroll and of the bottom jaw teeth are ground on both sides.
With cylindrical centring mount to DIN 702-4. The chuck is fitted to a flange from the rear by means of screws and this flange is then mounted on to the lathe spindle.
a) Self-centring adjustment of the base jaws (geared scroll);
b) Individual adjustment of top jaws.
This allows irregularly shaped components to be clamped as if to a face plate. The gear scroll for jaw adjustment is through-hardened, the flanks of the scroll and of the bottom jaw teeth are ground on both sides.
With cylindrical centring mount to DIN 702-4. The chuck is fitted to a flange from the rear by means of screws and this flange is then mounted on to the lathe spindle.
Standard:
DIN 702-4.
Material:
Cast iron
Supplied with:
1 set = 4 hardened base jaws,
1 set = 4 hardened reversible jaws (internally and externally applicable)
1 chuck key,