{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
DUO-LOCK HAIMER MILL HPC, AlTiN, ⌀ f9 D1: 2mm
Article no.: 220317 2
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- Number of cutting edges Z: 4
Product details
Technical Data
| Coating | AlTiN | |
| Cutter ⌀ D | 2 mm | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| Number of cutting edges Z | 4 | |
| Spacing of the cutters | unequal spacing | |
| Helix angle | 32 degrees | |
| Helix angle characteristic | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.05×D for side milling | |
| Machining strategy | HPC | |
| Through-coolant | no | |
| suitable arbor | with threaded shank | |
| Flute length L2 | 3 mm | |
| ⌀ D2 | 9.6 mm | |
| Overhang L1 | 3 mm | |
| Overall length L | 20 mm | |
| DUO-LOCK interface | DL10 | |
| Width across flats AF | 8 mm | |
| recommended tightening torque | 20 Nm | |
| Corner chamfer width at 45° | 0.04 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.018 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.036 mm | |
| Type of product | Cutter insert for milling |
Identification & Classification
| Article number | 220317 2 | |
| EAN / GTIN | 4034221140029 | |
| Manufacturer number | DL10F2004MN0200CDA | |
| Manufacturer/responsible person | HAIMER GmbH, Weiherstraße 21, 86568 IGENHAUSEN, Germany, www.haimer.com |
Application Table
N
700
N
700
N
235
P
220
P
180
P
160
P
120
M
80
M
60
S
30
K
130
Description
Version:
DUO-LOCK HAIMER MILL: Can be used as a universal tool. Unique end face geometry for ramping and circular interpolation milling. First choice for applications with short overhangs. DUO-LOCK HAIMER MILL Power Series: First choice for applications with long overhangs and unstable clamping conditions. For particularly smooth running on long overhangs it is preferable to use solid carbide extensions.