{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Solid carbide ball nose end mill HPC, TiAlN, ⌀ f8 DC / DS: 2/6mm
Article no.: 207485 2/6
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 4
Product details
Technical Data
| Cutting edge ⌀ DC | 2 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 4 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | 0.5×D for side milling; 0.05×D for copy milling | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Flute length Lc | 4 mm | |
| Radius R | 1 mm | |
| Overall length L | 80 mm | |
| Shank ⌀ Ds | 6 mm | |
| Feed fz for side milling in titanium > 850 N/mm2 | 0.008 mm | |
| Feed fz for copy milling in titanium > 850 N/mm2 | 0.01 mm | |
| Correction factor for vc | 1.25 | |
| Colour ring | pink | |
| Type of product | Ball-nosed slot drill |
Identification & Classification
| Article number | 207485 2/6 | |
| EAN / GTIN | 4045197354402 | |
| Manufacturer number | 207485 2/6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
S
50
S
30
Description
Version:
Special geometry for machining titanium and titanium alloys. 4 end face edges up to the centre. Thus can be used as a true 4-flute slot drill at all depths of cut.
Tolerance: Radius contour = ±0.005 mm.
Tolerance: Radius contour = ±0.005 mm.
Note:
NEW GENERATION AVAILABLE! Recommended successor product is No. 207487.