{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
CNC auxiliary cabinet with drawers, 26×20G, Height mm / Type: 1025/4
Article no.: 970755 1025/4
Article code:
Click to enlarge image
Installation in the right-hand half of the cabinet.Drawers and pull-out shelves can also be installed in the left-hand half of the cabinet.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Drawer/pull-out shelf load capacity: 200
- Drawer runner extension (partial/full extension): 100
- Height adjustment interval: 25
- Drawer usable area in G: 26×20
- Cylinder lock: modular lock barrel
Product details
Technical Data
| Material thickness | 1,2 mm | |
| Drawer/pull-out shelf load capacity | 200 kg | |
| Drawer runner extension (partial/full extension) | 100 % | |
| Height adjustment interval | 25 mm | |
| Drawer usable area in G | 26×20 | |
| Cylinder lock | modular lock barrel | |
| Colour selection | RAL 9002, 7035, 7016, 5012, 5005 | |
| Drawer usable width × usable depth in G | 26×20G | |
| Height | 1.025 mm | |
| Width | 1.500 mm | |
| Depth | 700 mm | |
| Usable height | 875 mm | |
| Drawer usable width | 650 mm | |
| Drawer usable depth | 500 mm | |
| Drawer usable width in G | 26 | |
| Drawer usable depth in G | 20 | |
| Weight | 175 kg | |
| Type of product | CNC machine auxiliary cabinet |
Identification & Classification
| Article number | 970755 1025/4 | |
| EAN / GTIN | 4062406163563 | |
| Manufacturer number | 970755 1025/4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
Tool auxiliary cabinet in 60×28G, with drawers 26×20G. With sliding doors, centrally lockable by slide handle with cylinder lock, raised edge on 3-sides and ribbed rubber mat. No anti-tilt device.Drawers and pull-out shelves can be installed in both cabinet halves, without a centre partition. 100% full extension drawers with differential runners. Load capacity for drawers and pull-out shelves 200 kg. Drawers with slots at 25 mm intervals to take slotted dividers.
Fitted with:
Colour:
Body, pull-out shelves and drawer cabinet body RAL 7035 light grey, doors and drawer fronts RAL 7016 anthracite powder-coated. Drawer body not configurable, always RAL 7035 light grey.
Note:
For storage of tools, a drawer inlay No. 970708 is required.
Warning:
Intended use
Reasonably foreseeable misuse
- Keep doors’ swing range unobstructed, keep doors and drawers closed.
- Drawers for storage of tools.
- Storage shelf for storage of workpieces and tools.
- For work in indoor industrial environments. For use on dry solid floors.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not make any unauthorised changes or modifications to it.
- Do not overload cabinet, drawers and storage shelf.
- Do not climb into or sit on cabinet, drawers or storage shelf.
- Do not place articles in the cabinet roughly.