{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Milled file, half-round coarse 250 mm
Article no.: 519160 250
Article code:
- Shape: D
- Standard: DIN 7264
Product details
Technical Data
| Grit designation | coarse | |
| Tooth spacing approx. | 3 mm | |
| Shape | D | |
| Cross section | 23×7 mm | |
| Length without tang | 250 mm | |
| Standard | DIN 7264 | |
| for material | Light and soft metals, plastics,wood, leather etc. | |
| Type of product | Milled file |
Identification & Classification
| Article number | 519160 250 | |
| EAN / GTIN | 2050001696267 | |
| Manufacturer/responsible person | Holger Klaes Feilen und Industriewerkzeuge, Hünger 3, 42929 WERMELSKIRCHEN, Deutschland, www.klaes-regio.com |
Application Table
Description
Version:
Milled files are characterised by the special sharpness of their teeth milled out of the solid with optimum chip grooves. This allows filings from soft and clogging materials to be cleared reliably. Will not clog.
Half-round hollow, taper plain end, teeth only on the outer face.
Half-round hollow, taper plain end, teeth only on the outer face.