{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
long end brush crimped PBUL dia. 10 mm shank dia. 6 mm steel wire dia. 0.20
Article no.: 4007220659199
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | End brush |
Identification & Classification
| Article number | 4007220659199 | |
| EAN / GTIN | 4007220659199 | |
| Manufacturer number | 43216001 | |
| L-Number | L51510 288 | |
| Manufacturer/responsible person | August Rueggeberg GmbH & Co. KG, Hauptstraße 13, 51709 MARIENHEIDE, Germany, www.pferd.com |
Description
Description:
Suitable for light brushing such as deburring, cleaning and derusting. Particularly long version to access deep areas. Steel wire is the most common filament material. Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring. PFERD TOOLS special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications. Steel wire withstands temperatures up to 300 °C.
Feature:
- RPM, max.: 20000 RPM
- RPM, optimum, from: 4000 RPM
- RPM, optimum, to: 9500 RPM
- Mounting system: Shank
- Dia. cup: 10 mm
- Dia. filament material: 0.2 mm
- Dia. external, metric: 10 mm
- Dia. shank, metric: 6 mm
- Filament material: Steel wire (ST)
- Length, filament: 20 mm
- Length, total: 120 mm
Advantage:
- Optimal access to hard-to-reach areas.
- Long tool life through use of PFERD special wire.
- Creates fine surfaces.
Application:
- Recommendations for use: Please observe the recommended rotational speeds. For the best results, use a tool drive with a minimum output of 300 watts.
- Applications: Cleaning; Deburring; Derusting; Removing oxide layers; Paint stripping; Roughening
- Drive types: Flexible shaft drive; Power drill; Straight grinder
Material:
- Materials that can be worked:
- Cast iron
- Cast steel
- Thermosetting plastics
- Elastomers
- Steel, cast steel
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Wood
- Materials that can be worked: Cast iron; Cast steel; Thermosetting plastics; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Wood
Note:
- When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.