{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
CAP blind rivet aluminium/steel flat round head 4.8 x 9.5, 500 pieces
Article no.: 1433427
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification & Classification
| Article number | 1433427 | |
| EAN / GTIN | 4007081450379 | |
| Manufacturer number | 1433427 | |
| Manufacturer/responsible person | SFS Group Germany GmbH Division Medical - GESIPA, Nordendstraße 13-39, 64546 MÖRFELDEN-WALLDORF, Germany, www.gesipa.de |
Description
Description:
CAP - The cup blind rivet
CAP - Airtight and watertight by nature.
The structure:
For technical reasons, the rivet mandrel of the CAP blind rivet must be fixed in the hollow rivet. However, this means that the rivet body can only deform slightly during the setting process. As a consequence of this, a blind cup rivet has only marginal hole friction properties. However, these are necessary in order to be able to compensate for larger borehole tolerances.
A tight connection with care:
If the CAP blind rivet is processed carefully, it provides the basis for a reliable “tight” connection.
The technical conditions make very careful preparation of the application essential. The borehole diameter should be as small as possible to ensure proper function in the application over a long period of time.
CAP - Airtight and watertight by nature.
The structure:
For technical reasons, the rivet mandrel of the CAP blind rivet must be fixed in the hollow rivet. However, this means that the rivet body can only deform slightly during the setting process. As a consequence of this, a blind cup rivet has only marginal hole friction properties. However, these are necessary in order to be able to compensate for larger borehole tolerances.
A tight connection with care:
If the CAP blind rivet is processed carefully, it provides the basis for a reliable “tight” connection.
The technical conditions make very careful preparation of the application essential. The borehole diameter should be as small as possible to ensure proper function in the application over a long period of time.
Feature:
- Diameter of the drill bit: 4.9 mm
- max. Clamping range: 5 mm
- min. Clamping range: 3.5 mm
- Material of the sleeve: Aluminium alloy
- Material of the pen: Steel, phosphatised
- spreading possible: No
- Length: 113 mm
- Head shape: Dome head
- min. Clamping length: 3.5 mm
- max. Clamping length: 5 mm
- Diameter of the head: 10 mm