{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, with quick-release chuck, 7456 ESD x 0.3-1.0 Nm
Article no.: 05074828010
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| maximum torque | 100 cNm | |
| Type of product | Torque screwdriver |
Identification & Classification
| Article number | 05074828010 | |
| EAN / GTIN | 4013288188298 | |
| Manufacturer number | 05074828010 | |
| L-Number | L60020 4512 | |
| Manufacturer/responsible person | Wera Werkzeuge GmbH, Korzerter Straße 21-25, 42349 WUPPERTAL, Germany, www.wera.de |
Description
Description:
- Wera torque screwdriver.
- Safe protection against electrostatic charge and associated damage.
- With a customised factory pre-set torque value.
- For all applications, where the same constant torque and repeat accuracy are required.
- The torque can be changed within the measuring range with the extra tool 05137003001.
- Afterwards you can check the set value using an off-the-shelf torque tester.
- Rapidaptor quick-release technology for rapid bit changes.
- Unlimited loosening torque for slackening stuck screws.
- Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand.
- Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21).
- Please note: 1 Ncm = 0.01 Nm.
Advantage:
- Customized pre-set, adjustable Kraftform ESD torque screwdriver
- ESD-safe tool thanks to surface resistance of ≤ 109 Ohm
- Kraftform handle for fast and ergonomic screwdriving
- Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive
- Distinct audible and perceivable excess load signal when the pre-set torque value is reached
Supplied with:
- Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, with quick-release chuck, 7456 ESD x 0.3-1.0 Nm
Note:
ATTENTION: Special article!
When ordering, please inform our sales department of the desired presetting within the possible range (0.3 - 1.0 Nm) in Nm.
Standard article (default 0.3 Nm): 05074828001
When ordering, please inform our sales department of the desired presetting within the possible range (0.3 - 1.0 Nm) in Nm.
Standard article (default 0.3 Nm): 05074828001